View STP11NM60N_1886650.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

march 2009 rev 5 1/20 20 stx11nm60n n-channel 600 v, 0.37 ? , 10 a mdmesh? ii power mosfet to-220, to-220fp, i 2 pak, ipak, dpak, d 2 pa k features 100% avalanche tested low input capacitance and gate charge low gate input resistance application switching applications description this series of devices is designed using the second generation of mdmesh? technology. this revolutionary power mosfet associates a new vertical structure to the company?s strip layout to yield one of the world?s lowest on-resistance and gate charge. it is therefore suitable for the most demanding high efficiency converters. figure 1. internal schematic diagram type v dss (@t j max) r ds(on) max i d stb11nm60n-1 stb11nm60n std11nm60n std11nm60n-1 stf11nm60n STP11NM60N 650 v 650 v 650 v 650 v 650 v 650 v 0.45 ? 0.45 ? 0.45 ? 0.45 ? 0.45 ? 0.45 ? 10 a 10 a 10 a 10 a 10 a (1) 10 a 1. limited only by maximum temperature allowed to-220 to-220fp dpak ipak 1 2 3 1 2 3 1 3 3 2 1 1 2 3 i2pak 1 3 d2pak table 1. device summary order codes marking package packaging stb11nm60n-1 b11nm60n i2pak tube stb11nm60n 11nm60n d2pak tape and reel std11nm60n-1 d11nm60n ipak tube std11nm60n d11nm60n dpak tape and reel STP11NM60N p11nm60n to-220 tube stf11nm60n f11nm60n to-220fp tube www.st.com
contents stx11nm60n 2/20 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
stx11nm60n electrical ratings 3/20 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit to-220,i2pak, d2pak,dpak,ipak to-220fp v ds drain-source voltage (v gs = 0) 600 v v gs gate-source voltage 25 v i d drain current (continuous) at t c = 25 c 10 10 (1) 1. limited only by maximu m temperature allowed a i d drain current (continuous) at t c = 100 c 6.3 6.3 (1) a i dm (2) 2. pulse width limited by safe operating area drain current (pulsed) 40 40 (1) a p tot total dissipation at t c = 25 c 90 25 w derating factor 0.8 0.2 w/c dv/dt (3) 3. i sd 10 a, di/dt 400 a/s, v dd = 80% v (br)dss peak diode recovery voltage slope 15 v/ns v iso insulation withstand voltage (rms) from all three leads to external heat sink (t = 1 s;t c = 25 c) 2500 v t stg storage temperature -55 to 150 c t j max. operating junction temperature 150 c table 3. thermal data symbol parameter value unit to-220 i2pak dpak d2pak ipak to-220fp r thj-case thermal resistance junction-case max 1.38 5 c/w r thj-amb thermal resistance junction-amb max 62.5 100 62.5 c/w r thj-pcb thermal resistance junction-pcb max 50 30 c/w t l maximum lead temperature for soldering purposes 300 c table 4. avalanche characteristics symbol parameter max value unit i as avalanche current, repetitive or not-repetitive (pulse width limited by t j max) 3.5 a e as single pulse avalanche energy (starting t j = 25 c, i d = i as , v dd = 50 v) 200 mj
electrical characteristics stx11nm60n 4/20 2 electrical characteristics (t case =25 c unless otherwise specified) table 5. on/off states symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 1 ma, v gs = 0 600 v dv/dt (1) 1. characteristic value at turn off on inductive load drain-source voltage slope v dd = 400 v,i d = 5 a, v gs =10 v 45 v/ns i dss zero gate voltage drain current (v gs = 0) v ds = max rating, v ds =max rating,tc=125 c 1 10 a a i gss gate body leakage current (v ds = 0) v gs = 20 v 100 na v gs(th) gate threshold voltage v ds = v gs , i d = 250 a 2 3 4 v r ds(on) static drain-source on resistance v gs = 10 v, i d = 5 a 0.37 0.45 ? table 6. dynamic symbol parameter test cond itions min. typ. max. unit g fs (1) 1. pulsed: pulse duration = 300s, duty cycle 1.5% forward transconductance v ds =15 v, i d = 5 a 7.5 s c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds =50 v, f=1 mhz, v gs =0 850 44 5 pf pf pf c oss eq. (2) 2. c oss eq. is defined as a constant equi valent capacitance giving t he same charging time as c oss when v ds increases from 0 to 80% v dss equivalent output capacitance v gs =0, v ds =0 to 480 v 130 pf rg gate input resistance f=1 mhz gate dc bias=0 test signal level=20 mv open drain 3.7 ? q g q gs q gd total gate charge gate-source charge gate-drain charge v dd =480 v, i d = 10 a v gs =10 v figure 19 31 4.2 15.9 nc nc nc
stx11nm60n electrical characteristics 5/20 2.1 electrical characteristi cs (curves) table 7. switching times symbol parameter test conditions min. typ. max. unit t d(on) t r t d(off) t f turn-on delay time rise time turn-off delay time fall time v dd = 300 v, i d = 5 a, r g = 4.7 ?, v gs = 10 v figure 18 figure 23 22 18.5 50 12 ns ns ns ns table 8. source drain diode symbol parameter test conditions min. typ. max. unit i sd i sdm source-drain current source-drain current (pulsed) 10 40 a a v sd (1) 1. pulsed: pulse duration = 300s, duty cycle 1.5% forward on voltage i sd = 10 a, v gs =0 1.3 v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd =10 a, di/dt =100 a/s, v dd =100 v figure 20 340 3.26 19.2 ns c a t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current v dd =100 v di/dt =100 a/s, i sd = 10 a t j = 150 c figure 20 460 4.42 19.2 ns c a figure 2. safe operating area for to-220, i2pak, d2pak figure 3. thermal impedance for to-220, i2pak, d2pak
electrical characteristics stx11nm60n 6/20 figure 4. safe operating area for to-220fp figure 5. thermal impedance for to-220fp figure 6. safe operating area for dpak, ipak figure 7. thermal impedance for dpak, ipak
stx11nm60n electrical characteristics 7/20 figure 8. output characteristics figure 9. transfer characteristics figure 10. transconductance figure 11. static drain-source on resistance figure 12. gate charge vs gate-source voltage figure 13. capacitance variations
electrical characteristics stx11nm60n 8/20 figure 14. normalized gate threshold voltage vs temperature figure 15. normalized on resistance vs temperature figure 16. source-drain diode forward characteristics figure 17. normalized b vdss vs temperature
stx11nm60n test circuits 9/20 3 test circuits figure 18. switching times test circuit for resistive load figure 19. gate charge test circuit figure 20. test circuit for inductive load switching and diode recovery times figure 21. unclamped inductive load test circuit figure 22. unclamped inductive waveform figure 23. switching time waveform
package mechanical data stx11nm60n 10/20 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com. ecopack is an st trademark.
stx11nm60n package mechanical data 11/20 to-220 mechanical data dim mm inch min typ max min typ max a 4.40 4.60 0.17 3 0.1 8 1 b 0.61 0. 88 0.024 0.0 3 4 b 1 1.14 1.70 0.044 0.066 c0.4 8 0.70 0.01 9 0.027 d 15.25 15.75 0.6 0.62 d1 1.27 0.050 e 10 10.40 0. 393 0.40 9 e 2.40 2.70 0.0 9 4 0.106 e1 4. 9 5 5.15 0.1 9 4 0.202 f1.2 3 1. 3 2 0.04 8 0.051 h1 6.20 6.60 0.244 0.256 j1 2.40 2.72 0.0 9 4 0.107 l1 3 14 0.511 0.551 l1 3 .50 3 . 93 0.1 3 7 0.154 l20 16.40 0.645 l 3 02 8 . 9 0 1.1 3 7 ? p 3 .75 3 . 8 5 0.147 0.151 q2.65 2. 9 5 0.104 0.116
package mechanical data stx11nm60n 12/20 dim. mm. inch min. typ max. min. typ. max. a 4.40 4.60 0.17 3 0.1 8 1 b 2.5 2.7 0.0 98 0.106 d 2.5 2.75 0.0 98 0.10 8 e 0.45 0.70 0.017 0.027 f 0.75 1.00 0.0 3 00.0 39 f1 1.15 1.50 0.045 0.067 f2 1.15 1.50 0.045 0.067 g4. 9 55.200.1 9 50.204 g1 2.40 2.70 0.0 9 4 0.106 h 10 10.40 0. 393 0.40 9 l2 16 0.6 3 0 l 3 2 8 .6 3 0.6 1.126 1.204 l4 9 . 8 0 10.60 0. 38 5 0.417 l5 2. 93 .6 0.114 0.141 l6 15. 9 0 16.40 0.626 0.645 l7 99 . 3 00. 3 54 0. 3 66 di a3 3 .2 0.11 8 0.126 to-220fp mechanical data l2 a b d e h g l6 f l3 g1 123 f2 f1 l7 l4 l5 7012510-i di a
stx11nm60n package mechanical data 13/20 d2pak (to-263) mechanical data dim mm inch min typ max min typ max a 4.40 4.60 0.17 3 0.1 8 1 a1 0.0 3 0.2 3 0.001 0.00 9 b 0.70 0. 93 0.027 0.0 3 7 b 2 1.14 1.70 0.045 0.067 c 0.45 0.60 0.017 0.024 c2 1.2 3 1. 3 60.04 8 0.05 3 d 8 . 9 5 9 . 3 50. 3 52 0. 3 6 8 d1 7.50 0.2 9 5 e 10 10.40 0. 39 40.40 9 e1 8 .50 0. 33 4 e 2.54 0.1 e1 4. 88 5.2 8 0.1 9 20.20 8 h15 15. 8 50.5 9 00.624 j1 2.4 9 2.6 9 0.0 99 0.106 l2.2 9 2.7 9 0.0 9 0 0.110 l1 1.27 1.40 0.05 0.055 l2 1. 3 0 1.75 0.051 0.06 9 r 0.4 0.016 v2 0 8 0 8 0079457 m
package mechanical data stx11nm60n 14/20 i2pak (to-262) mechanical data dim mm inch min typ max min typ max a 4.40 4.60 0.17 3 0.1 8 1 a1 2.40 2.72 0.094 0.107 b 0.61 0. 88 0.024 0.0 3 4 b 1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.2 3 1. 3 20.04 8 0.052 d 8 .95 9. 3 50. 3 52 0. 3 6 8 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 e 10 10.40 0. 3 9 3 0.410 l1 3 14 0.511 0.551 l1 3 .50 3 .9 3 0.1 3 7 0.154 l2 1.27 1.40 0.050 0.055
stx11nm60n package mechanical data 15/20 dim. mm. min. typ max. a 2.20 2.40 a1 0. 9 01.10 a2 0.0 3 0.2 3 b 0.64 0. 9 0 b 4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 d 6.00 6.20 d1 5.10 e 6.40 6.60 e1 4.70 e2.2 8 e1 4.40 4.60 h 9 . 3 5 10.10 l1 l1 2. 8 0 l2 0. 8 0 l4 0.60 1 r0.20 v2 0 o 8 o to-252 (dpak) mechanical data 006 8 772_g
package mechanical data stx11nm60n 16/20 dim. mm. min. typ max. a 2.20 2.40 a1 0. 9 01.10 b 0.64 0. 9 0 b 2 0. 9 5 b 4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 d 6.00 6.20 e 6.40 6.60 e2.2 8 e1 4.40 4.60 h 16.10 l 9 .00 9 .40 (l1) 0. 8 01.20 l2 0. 8 0 v1 10 o to-251 (ipak) mechanical data 006 8 771_h
stx11nm60n packaging mechanical data 17/20 5 packaging mechanical data tape and reel shipment dpak footprint dim. mm inch min. max. min. max. a 330 12.992 b 1.5 0.059 c 12.8 13.2 0.504 0.520 d 20.2 0.795 g 16.4 18.4 0.645 0.724 n 50 1.968 t 22.4 0.881 base qty bulk qty 2500 2500 reel mechanical data dim. mm inch min. max. min. max. a0 6.8 7 0.267 0.275 b0 10.4 10.6 0.409 0.417 b1 12.1 0.476 d 1.5 1.6 0.059 0.063 d1 1.5 0.059 e 1.65 1.85 0.065 0.073 f 7.4 7.6 0.291 0.299 k0 2.55 2.75 0.100 0.108 p0 3.9 4.1 0.153 0.161 p1 7.9 8.1 0.311 0.319 p2 1.9 2.1 0.075 0.082 r 40 1.574 w 15.7 16.3 0.618 0.641 tape mechanical data all dimensions are in millimeters
packaging mechanical data stx11nm60n 18/20 tape and reel shipment d 2 pak footprint * on sales type dim. mm inch min. max. min. max. a 330 12.992 b 1.5 0.059 c 12.8 13.2 0.504 0.520 d 20.2 0795 g 24.4 26.4 0.960 1.039 n 100 3.937 t 30.4 1.197 base qty bulk qty 1000 1000 reel mechanical data dim. mm inch min. max. min. max. a0 10.5 10.7 0.413 0.421 b0 15.7 15.9 0.618 0.626 d 1.5 1.6 0.059 0.063 d1 1.59 1.61 0.062 0.063 e 1.65 1.85 0.065 0.073 f 11.4 11.6 0.449 0.456 k0 4.8 5.0 0.189 0.197 p0 3.9 4.1 0.153 0.161 p1 11.9 12.1 0.468 0.476 p2 1.9 2.1 0.075 0.082 r 50 1.574 t 0.25 0.35 0.0098 0.0137 w 23.7 24.3 0.933 0.956 tape mechanical data
stx11nm60n revision history 19/20 6 revision history table 9. document revision history date revision changes 03-aug-2006 1 first release 14-nov-2006 2 complete version 02-oct-2007 3 figure 8.: output characteristics has been updated. added new package (i2pak) 03-mar-2008 4 added new package d2pak 03-mar-2009 5 figure 2 , figure 4 and figure 6 corrected.
stx11nm60n 20/20 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in military , air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2009 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STP11NM60N

	To Download STP11NM60N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .